Standard MP 16 inch switchable frequencies search coil

The Nexus Standard MP 16 inch Silver Scout search coil has 3 switchable frequencies. The frequencies are instantly changed with a toggle switch located on the search co

Differences between MP V3 and MP V3+

  The new Nexus Standard MP V3+ has all the features of the MP V3 and the following are unique to this model:

VCO During Search

The VCO is useful for iron infested areas and for checking target signals that may not be well indicated by the LED meter.

LC-MC Control

The LC-MC SET control is meant to set the cut off point between low conductors

MP V3 Beach Settings

For salt water beaches, the MP V3+ is recommended because it utilizes iron rejection which rejects signals from salt water.

Incorrect And Misleading Detector Tests

Recovering Targets And Empty Hole Signals.When attempting to recove

MP V3 VCO rotary knob / potentiometer function

MP V3+ Beach Settings

Follow these steps for the best possible metal detecting depth on the beach:

MP V3 - Settings for the RGB meter

MC Fine control

M.C. Fine stands for Mineral Control Fine. This control is to be used on highly mineral ground where the standard GB is not capable to set the detector properly. The M.C. Fine wil

Correct way to check empty potholes

On some soil, not on all soil, the MP V3+ may give a positive signal above empty potholes when the search coil is swung at the recommended level above ground. If this happens, place the search coil st...